Specifications
298
Ambient Light Immunity
(from total darkness):
Indoor: 450 ft. candles (4,845 lux).
Outdoor Triggered: 9,000 ft. candles (96,900 lux).
Outdoor Triggerless: up to 2,000 ft. candles (25,528 lux).
Motion Tolerance: 63.5 cm (25 in.) per second, typical
Supported Symbologies 1D enabled by default:
Codebar, Code 39, Code 128, EAN-13, EAN-8, Interleaved 2 of 5, UPC-A and
UPC-E.
1D disabled by default:
Code 11, Code 32 Pharmaceutical (PARAF), Code 93, MSI, Reduced Space
Symbology (RSS-14, RSS Limited, RSS Expanded), Straight 2 of 5 IATA (two-bar
start/stop), Straight 2 of 5 Industrial (three-bar start/stop), Trioptic, UPC-E1,
USPS GS1-128, ISBT-128, JAN-8, JAN-13, BN/Brookland, ISSN, Coupon Code,
Discrete 2 of 5, Chinese 2 of 5, Matrix 2 of 5, Composite (CC-A, CC-B, CC-C),
EAN, UCC Composite, OCR-A, OCR-B.
2D enabled by default:
4-CB (4-State Customer Bar code), Aztec, MicroPDF417, PDF417, MaxiCode.
2D disabled by default:
Australian Post, British Post (4 state code and “infomail”), Data Matrix, Japanese
Post, KIX (Netherlands) Post, Planet Code, Postnet, QR Code, TCIF Linked Code
39 (TLC39), Canada Post, Royal Mail Mailmark, USPS, OneCode/Intelligent Mail,
UPU FICS Postal, OCR-A, OCR-B, Han Xin.
OCR disabled by default:
OCR-A, OCR-B, MICR E13B, US Currency
Supported Aiming Modes: Class 2 Laser, cross hair with bright center for sunlight visibility; Pick List mode
option configurable.
Interface: Bluetooth: Class I, v 4.0 with Bluetooth Low Energy (BLE).
Supported Profiles: Serial Port Profile (SPP), Human Interface Device Profile
(HID), Service Discovery Application Profile (SDAP).
NFC Tag: Tap-to-Pair; used to simplify the pairing process.
Pairing: by reading terminal Bluetooth address as bar code of the host device or
from a printed label.
Field Replaceable Parts: Battery, trigger module, triggerless module, comfort pad, straps and strap buckle.
User Interface
LED: Line of Sight (LOS) Two (2) RGB LEDs located at the back side of the device
(programmable)
Radio and Battery capacity status - One (1) RGB LED located on the top side of
the device
Table 19 RS6000 Technical Specifications (Continued)
Item Description
To Next Page
Loading...
Need help?
General
