Zebra RS6000 User Manual

Specifications
299
Beeper: Back of the device, minimum 85 dBA at 10 cm with High Tone / High Volume.
Restore Key: User accessible for emergency warm boot and Bluetooth reconnect (after
disconnect timeout).
Scan Triggering: Manual or automatic using Interactive Sensor Technology (IST) (Accelerometer/
Proximity)
User Environment
Operating Temperature: -30°C (-22°F) to +50°C (+122°F).
Storage Temperature: -40°C (-40°F) to +60°C (+140°F) incl. battery
-40°C (-40°F) to +70°C (+158°F) excl. battery
Sealing IEC 60529: IP65
Humidity: 5% to 95% (non-condensing).
Drop Specification: 6 ft./1.8 m multiple drops to concrete across operating temperature range.
Tumble 1,000 tumbles @ 0.5 m (room temperature)
Vibration Sine 5-2000 Hz, 4g peak, one hour per axis
Random 20-2000 Hz, 6g RMS or 0.04g2/Hz, one hour per axis
Electrostatic Discharge
(ESD):
+/-20 kVdc air discharge
+/-10 kVdc contact discharge
Power
Li-Ion 3350 mAh, 3.6V with up to 100,000 scans or up to 80+ hours with 1440
scans per hour on a single charge using a battery with ≤ 100 charge/discharge
cycles
Software Compatibility
123Scan2, DataWedge and MDM solutions (using Zebra MDM toolkit)
Peripherals and Accessories
Battery charger: 1-Slot RS6000 Charging Cradle
2-Slot WT6000/RS6000 Charging Cradle
5-Slot RS6000 Charge Only Cradle
10-Slot WT6000/RS6000 Charge Only Cradle
10-Slot RS6000 Charge Only Cradle
4-Slot Battery Charger
20-Slot Battery Charger
Regulatory
Electrical Safety: Certified to UL60950-1, CSA C22.2 No. 60950-1, EN60950-1, IEC 60950-1
Laser Safety: CDRH Class II, IEC 60825-1 Class 2.
Table 19 RS6000 Technical Specifications (Continued)
Item Description

Zebra RS6000 Specifications

General

Brand	Zebra
Model	RS6000
Category	Barcode Reader
Language	English