Ascotel IntelliGate 2025/2045/2065
Part 3 Planning DECT systems 653
The handset’s normal system response is now switched off, i.e. it remains on this
radio unit and cannot take any calls. Outgoing calls can be made to all system sub-
scribers.
The "Idle Lock State" menu is used for re-measuring an installed system radio unit
in operation:
Tab. 3.26: Indications in the "Idle Lock" menu
The "Locked State" menu is used for measuring the selected radio unit:
Tab. 3.27: Indications in the "Locked" menu
Long-Clicks
By pressing the following keys you can access additional functions directly. These
indications apply to Office 100, Office 135, Office 150 and Office 155pro. Devia-
tions are indicated by footnotes.
Display Function
"M" Display of single or multiple radio units to measure
"lock" Access the ”Call quality” menu
"C" Goes one step back
Display Function
Long click on 4 Access to further submenus
"Hon" Enables the switch to another radio unit (at present not permitted before this key is
actuated)
"Hoff" Bars any switch to another radio unit (at present not permitted before this key is
actuated)
"C" Goes back to normal menu
To Next Page
Loading...
