EasyManua.ls Logo

Aastra Ascotel IntelliGate 2025 - Page 654

Aastra Ascotel IntelliGate 2025
1014 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ascotel IntelliGate 2025/2045/2065
654 Planning DECT systems Part 3
Tab. 3.28: Long-clicks on the handsets
See also:
Descriptions of other key long-clicks (to simplify function operation) can
be found in the Office User’s Guide.
Re-measuring the handover response of the installed system
radio units
This method is used for checking a system that is already in operation. Both the
system and the standard handset can be used.
Key Function
0
1)
1)
Office 135 can also be switched on/off using the C-key
The handset is switched off to save power. It is switched back on with the Connect key and the
Foxkey. Once the handset is switched off, it cannot receive any more calls!
1
2)
2)
Office 135 and Office 155pro temporary switchover only.
Switches over to the next radio system.
2 Indicates the radio system parameters (handset IPEI and radio system PARK). With each additional
call the next radio system is indicated in each case if there are other logons.
3 Indicates the handset’s internal diagnostics.
4 Indicates the data of the valid radio unit. Continually updated during connection. One-shot dis-
play if no connection.
5 Indicates the handset’s software version.
6
3)
3)
Not available for Office 150 / Office 155pro.
Indicates battery charge status and the type.
7
4)
4)
Office 135 / Office 155pro: Indicates the PBX’s software version.
Indicates the handset’s internal diagnostics.
8 Activates "semi" key lock". See Operating Instructions for details.
9 Activates key lock. See Operating Instructions for details.
5 + 3 Switch error messages on/off (first start value: off).
Messages relating to the following errors cannot be switched on/off:
HS logon error, incorrect location registration, no locatable radio unit, network, PBX or radio unit
overload.
5 + 4
5)
5)
Office 135 / Office 155pro: Long-click on the #-key.
Switch on/off warning tone on exceeding radio range (first start value: on).
5 + 7
5)
Swtch on/off tone accompanying error message for overloaded radio unit (system busy) (first start
value: off).

Table of Contents

Related product manuals