Aastra Ascotel IntelliGate 2025 - Page 925

Ascotel IntelliGate 2025/2045/2065
Part 7 Operations supervision 925
The following parameters need to be selected or entered in the Fault & Mainte-
nance Manager:
• Location of the V.24 interface to which the local output destination is con-
nected (V.24 Main = Mainboard; V.24 PA = Pocket Adapter)
• Required output format "PC" or "Text" (see "Output formats", page 925)
• With "Text" output format: Language (de / fr / it
1)
/en ) in which the event
messages are to be printed out.
• With the V.24 interface of the mainboard - port number
• With the V.24 interface on the PA - port address
• With "Text" output format and printer as the output location: Maximum page
length of the printout
Output formats
There are two output formats available for local signal destinations connected to
a V.24 interface.
• Text format
• PC format
Text format
Fig. 7.13: Event signal format "Text" for printer as the local output destination (example with
date, time and event message)
PC format
The event signal format "PC" is required if a PC is configured as the local signal
destination using the System Event Manager (SEM).
1)
Depending on the country, the third language can also be a different one.
The language set here is also used for event messages in message group 8 (System 2025 / 2045) and 16
(System 2065) respectively.
11.03.97 10:12 LOSS OF SYNC ON T/T2 O.9
haz1234aaena0