ADCMT 6166 User Manual

6166 DC Voltage Current Source Operation Manual
6.6.4 Remote Command List
6-38
Mem-
ory
Memory setting RSAV Saves memory data.
--
RLOD Loads memory data.
--
RCLR Initializes memory data.
Data in the non-volatile memory is
initialized.
Saved data is not initialized.
--
Scan First number
Last number
SC First number and last number setting
SCmmm,nnn
mmm: First number 0 to 999
nnn: Last number 0 to 999
0999 - -
SC? Query of first number and last number
Response: SCmmm,nnn
mmm: First number 0 to 999
nnn: Last number 0 to 999
Step time SP Step time setting
SPdd dd: 01 to 99 (sec)
1
--
SP? Query of step time
Response: Spdd
Scan operation SCM0 Hold scan
--
SCM1 Single scan
SCM2 Repeat scan
SCM? Query of scan operation
-
Response: SCM1 to SCM2
Memory num-
ber
RCLMnnn Specifies memory number.
0-
RCLMnnn,: memory number 0 to 999
RCLM? Query of present memory number
-
Response: RCLM000 to RCLM999
Scan start *TRG Starts, pauses or resumes scan.
Sending *TRG during scan operation
pauses it. Sending *TRG again during
pause resumes it.
-
Scan stop SWSP Stops scan.
-
Class Item Command Description
Default Operation
Power
ON
Factory
shipment
Divider
function
Thermal
electrom
otive
force
function
Scan
stopped
Scan
running
CAL

ADCMT 6166 Specifications

General

Brand	ADCMT
Model	6166
Category	Measuring Instruments
Language	English