ADCMT 6166 User Manual

6166 DC Voltage Current Source Operation Manual
6.6.4 Remote Command List
6-39
Class Item Command Description
Default Operation
Power
ON
Factory
shipment
Divider
function
Thermal
electrom
otive
force
function
Scan
stopped
Scan
running
CAL
Remote Block delim-
iter
DL0 CR/LF +EOI
*3
DL1 LF
DL2 EOI
DL3 LF +EOI
DL? Query of block delimiter
Response: DL0 to DL3
Service
request
S0 SRQ transmission is allowed.
*3
S1 SRQ transmission is not allowed.
S? Query of SRQ transmission
Response: S0 or S1
Status *CLS Status clear
*STB? Status Byte reading
Response: d
*SREn Service Request Enable Register setting
(0 to 255)
00 *4
*SRE? Response: d
*ESR? Query of Standard Event Status Regis-
ter (ESR)
Response: d
*ESEn Standard Event Status Enable Register
setting (0 to 255)
00 *4
*ESE? Response: d
DSR? Query of Device Event Register (DER)
Response: d
DSEn Device Event Enable Register setting
(0 to 65535)
00 *4
DSE? Response: d
*PSCn n:±32767
When n is other than 0, the following
registers are cleared at power ON.
When n is 0, they are not cleared.
- Service Request Enable Register
- Standard Event Status Enable Regis-
ter
*4
*PSC? Response: 0 or 1 (when n is set other
than 0.)
*3: Not initialized by the RINI command.
*4: Not initialized by the RINI or *RST command.

ADCMT 6166 Specifications

General

Brand	ADCMT
Model	6166
Category	Measuring Instruments
Language	English