ADCMT 6166 User Manual

6166 DC Voltage Current Source Operation Manual
6.6.5 6161-Compatible Remote Command List
6-47
Scan First number
Last number
SC First number and last number setting
0, 99 - -
SCmm,nn
mmm: First number 0 to 99
nn: Last number 0 to 99
SC? Query of first number and last number
Response: SCmm,nn
mm: First number 0 to 99
nn: Last number 0 to 99
Step time STM Step time setting
1--
STMdd dd: 01 to 99 (sec)
STM? Query of step time
Response: STMdd
Scan operation ST0 Single scan
--
ST1 Repeat scan
ST2 Hold scan
ST? Query of scan mode
-
Response: STM0 to STM2
Memory number RCLnn Specifies memory number.
0-
RCLnn,: memory number 0 to 99
Scan start *TRG Start
-
STT Start command
PAU Pause command
Continue
(Resume)
STT Resume command
-
Scan stop STP Stop command
-
Remote Block delimiter DL0 CR/LF +EOI
DL1 LF
DL2 EOI
DL3 LF +EOI
DL? Query of block delimiter
Response: DL0 to DL3
Service request S0 SRQ transmission is allowed.
S1 SRQ transmission is not allowed.
Class Item Command Description
Default Operation
Power
ON
Factory
shipment
Divider
function
Scan
stopped
Scan
running

ADCMT 6166 Specifications

General

Brand	ADCMT
Model	6166
Category	Measuring Instruments
Language	English