ADCMT 6166 User Manual

6166 DC Voltage Current Source Operation Manual
3.8.2 Setting Program Memory
3-32
(1) Operating procedure of setting the voltage source value in the memory
Check that the source value screen is displayed.
If the menu screen, limit setting screen or numeric keypad input screen is displayed, press the EXIT
key.
If the program function has been already enabled, go on to Step .
Press . The program function is enabled and the program screen is displayed.
While the program screen is displayed, the PROGRAM key lights up.
In the example display below, the initial values are set in memory number 0.
Example display Program screen
Press . The memory setting screen is displayed.
Example display Memory setting screen
12 3 5 7 4 6 7
1
3
2
3

ADCMT 6166 Specifications

General

Brand	ADCMT
Model	6166
Category	Measuring Instruments
Language	English