ADCMT 6166 User Manual

6166 DC Voltage Current Source Operation Manual
3.8.7 Starting, Stopping and Pausing Memory Scan
3-50
For information on how to set the data and parameters, refer to Section 3.8.2, "Setting Program Memory"
and Section 3.8.6, "Setting First and Last Numbers and Step Time."
(1) This is an example to execute Hold scan.
Operating procedure
Check that the source value screen is displayed.
If the menu screen, limit setting screen or numeric keypad input screen is displayed, press the EXIT
key.
If the program function has been already enabled, go on to Step .
Press . The program function is enabled and the program screen is displayed.
While the program screen is displayed, the PROGRAM key lights up.
Press to select Hold scan.
The upper left display switches as Hld  Sng  Rpt.
Display example Program screen
Press to output the source value. The source value of memory number 0 is output.
7
4
8
9
2 31
5 6
9
1
3
2
3
Shows that the scan operation is set to Hold.
Shows that the scan is stopped.
4

ADCMT 6166 Specifications

General

Brand	ADCMT
Model	6166
Category	Measuring Instruments
Language	English