adept technology MV User Manual

Chapter 10 Introduction
180 Adept MV Controller User’s Guide, Rev. B
Introduction
The Adept VME Enhanced Joint Interface (EJI) board is a 6U single-slot VME
board designed to control the motion axes on an Adept robot. The EJI board has
connectors for the power chassis cable and the arm (robot) signal cable. There is
another connector for external encoders, typically used for belt tracking.
See the robot instruction handbook for your Adept robot for complete
information on installation, configuration, and operation of the EJI board and
your robot.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

adept technology MV Specifications

General

Brand	adept technology
Model	MV
Category	Controller
Language	English