Chapter 1 Warnings, Cautions, and Notes
Adept MV Controller User’s Guide, Rev. B 29
• The new Controller Interface Panel (CIP). This panel replaces the VFP
external front panel. The CIP includes the functionality of the VFP and adds
additional DIO, remote front panel capabilities, serial I/O, and DeviceNet
connections. The VFP is not compatible with V
+
version 13.0.
• Ethernet capability is now built into the AWC processors; the NET board is
obsolete.
• DeviceNet capability has been added to Adept systems.
Warnings, Cautions, and Notes
There are three levels of special notation used in this manual. They are:
If the actions indicated in a “WARNING” are not
complied with, injury or major equipment damage could result. A
Warning statement will typically describe the potential hazard, its
possible effect, and the measures that must be taken to reduce the
hazard.
If the WARNING is indicated with a lightning bolt
instead of an exclamation mark, an electrical danger or shock is
possible for personnel working with the system.
If the action specified in the “CAUTION” is not complied
with, damage to your equipment could result.
A “NOTE” provides supplementary information,
emphasizes a point or procedure, or gives a tip for easier operation.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General