Chapter 13 Fan Filter Inspection and Cleaning MV-5/MV-10
Adept MV Controller User’s Guide, Rev. B 211
Fan Filter Inspection and Cleaning MV-5/MV-10
The air filter located on the front of the chassis should be inspected regularly and
cleaned at the first sign of dust or dirt buildup. The filter must be inspected and
cleaned at least once per month. Regular cleaning will prolong the life of the filter.
If the filter becomes clogged or unusable for any reason, you will need to order a
new air filter; the Adept part number is 40340-00030.
1. Turn off the controller.
2. Loosen the two screws on the fan filter cover to gain access to the filter; see
'(.
3. Pull the air filter out and inspect for dust or dirt particles. If cleaning is
required, use compressed air to clean the filter. (Follow appropriate safety
procedures regarding use of compressed air.)
4. Replace the cleaned air filter and secure the filter holder.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
