!"
97
Aborted (–400)
Explanation: The last command requested, or the program that was executing,
has been aborted at the operator’s request.
User action: None.
*Already attached to logical unit* (–515)
Explanation: A program has executed more than one ATTACH instruction for a
specific logical unit, without executing a DETACH in between. (The
program is still attached to the logical unit after this error occurs.)
User action: Check the program logic and remove redundant ATTACH instruc-
tions.
*Ambiguous AUTO invalid* (–477)
Explanation: When exiting from the program editor, V
+
has encountered an auto-
matic variable with undetermined type. That is, the system cannot
determine if the variable is real-valued or a transformation. Auto-
matic variables cannot be ambiguous, since their storage require-
ments must be known before they are referenced.
User action: Include the REAL or LOC type specification parameter in the AUTO
statement that declares the variable, or reference the variable in a
program instruction in a manner that makes its type clear.
*Ambiguous name* (–453)
Explanation: The abbreviation used for the last command, instruction, or
system-defined name was not long enough to identify the operation
intended.
User action: Reenter the last line, using a longer abbreviation.
*AOI not defined* (–752)
Explanation: An attempt has been made to place a vision tool using an AOI
(area-of-interest) that has not been defined.
User action: Define the AOI using the VDEF.AOI instruction.
Are you sure (Y/N)? (10)
Explanation: The requested command will have a significant effect on the state of
the system, and V
+
wants to know if you really want it to happen.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General