Allen-Bradley CompactLogix 5480 User Manual

160 Rockwell Automation Publication 5069-UM002A-EN-P - January 2019
Chapter 7 Use I/O Modules
3. At the Select Module Type window, click Create to add a discovered
module to your project.
4. At the New Module window, configure the module properties and
click OK.
5. At the warning dialog box, click Yes.
6. Close the Select Module Type dialog box.
TIP If you inhibit the module connection, you must remember to uninhibit the
connection later.

Allen-Bradley CompactLogix 5480 Specifications

General

Brand	Allen-Bradley
Model	CompactLogix 5480
Category	Controller
Language	English