Rockwell Automation Publication 5069-UM002A-EN-P - January 2019 161
Use I/O Modules Chapter 7
To add additional local I/O modules, complete one of the following:
• If you cleared the Close on Create checkbox when you created the first
I/O module, repeat steps
3…6.
• If you did not clear the Close on Create checkbox when you created the
first I/O module, repeat steps
2…6.
New Module
To use New Module to add a module, complete the following steps.
1. Right-click 5069 Backplane and choose New Module.
2. Select the module and click Create.
To Next Page
Loading...
