4 Rockwell Automation Publication 5069-UM002A-EN-P - January 2019
Table of Contents
Set the Controller IP Address with RSLinx Classic Software . . 64
Set the Controller IP Address with the Logix Designer
Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Use a Secure Digital Card to Set the Controller IP Address . . . 68
Update Controller Firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Download Only Controller Firmware Files . . . . . . . . . . . . . . . . . . 69
Download Controller Firmware Files as Part of the
Windows Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Chapter 3
Start to Use the Controller Create a Logix Designer Application Project. . . . . . . . . . . . . . . . . . . . . 79
Go Online with the Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Use RSWho to Specify a Communication Path to
Go Online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Use a Recent Communications Path to Go Online . . . . . . . . . . . 84
Use the Controller Status Menu to Go Online . . . . . . . . . . . . . . . 84
Download a Project to the Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Use the Who Active Dialog Box to Download . . . . . . . . . . . . . . . 85
Use the Controller Status Menu to Download . . . . . . . . . . . . . . . 86
Upload from the Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Use the Who Active Dialog Box to Upload . . . . . . . . . . . . . . . . . . 87
Use the Controller Status Menu to Upload . . . . . . . . . . . . . . . . . . 89
Choose the Controller Operation Mode . . . . . . . . . . . . . . . . . . . . . . . . 90
Use the Mode Switch to Change the Operating Mode . . . . . . . . 91
Use the Logix Designer to Change the Operating Mode . . . . . . 92
Change Controller Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Use the Reset Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Controller Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
COS Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Disable the Ethernet Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Chapter 4
Use the Secure Digital Card Store to the SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Load from the SD Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Controller Power-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
User-initiated Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Other Secure Digital Card Tasks. . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Chapter 5
EtherNet/IP Network Network Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
EtherNet/IP Network Functionality. . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Software for EtherNet/IP Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Nodes on an EtherNet/IP Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Devices Included in the Node Count. . . . . . . . . . . . . . . . . . . . . . . 118
Devices Excluded from the Node Count. . . . . . . . . . . . . . . . . . . . 118