Allen-Bradley CompactLogix 5480 User Manual

Rockwell Automation Publication 5069-UM002A-EN-P - January 2019 5
Table of Contents
EtherNet/IP Network Topologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
DLR Network Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Linear Network Topology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Star Network Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Integrated Architecture Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
EtherNet/IP Network Communication Rates . . . . . . . . . . . . . . . . . . 123
Socket Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Chapter 6
Connect to Different EtherNet/IP
Network Levels
Available Network Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Connect to an Enterprise-level Network . . . . . . . . . . . . . . . . . . . . . . . 129
Connect to a Device-level Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Ports A1 and A2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Port B1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
EtherNet/IP Modes with Ports A1 and A2 . . . . . . . . . . . . . . . . . . . . . 131
Dual-IP Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Linear/DLR Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Overlapping IP Address Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Configure the EtherNet/IP Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Configure Dual-IP Mode in the Logix Designer Application . 136
Configure Dual-IP Mode in RSLinx Classic Software. . . . . . . . 138
Configure Linear/DLR Mode in the Logix Designer Application .
140
Configure Linear/DLR Mode in RSLinx Classic Software . . . 142
Change the EtherNet/IP Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Change the EtherNet/IP Mode in the Logix Designer Application
145
Change the EtherNet/IP Mode in RSLinx Classic Software . . 147
Internet Protocol Configuration in Logix Designer Application . .
150
Port Configuration in RSLinx Classic Software . . . . . . . . . . . . . 151
Controller Functionality Considerations . . . . . . . . . . . . . . . . . . . 152
DNS Requests. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
DNS Request Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
SMTP Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Use Socket Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Send Message Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Software Display Differences for EtherNet/IP Modes . . . . . . . . . . . 155
Chapter 7
Use I/O Modules Local I/O Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Add Local I/O Modules to a Project . . . . . . . . . . . . . . . . . . . . . . . 159
Electronic Keying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Remote I/O Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Add Remote I/O Modules to a Project . . . . . . . . . . . . . . . . . . . . . 166

Allen-Bradley CompactLogix 5480 Specifications

General

Brand	Allen-Bradley
Model	CompactLogix 5480
Category	Controller
Language	English

Summary

CompactLogix 5480 System

Minimum Requirements

Details the minimum software and firmware version requirements for the controller.

Power the System

Explains how the CompactLogix 5480 controller provides power to the system.

Uninterruptible Power Supply

Describes the need for and connection of an external UPS for orderly shutdown.

Connect to the Controller

Configure EtherNet/IP and USB Drivers on Your Workstation

Explains the necessary driver configuration on a workstation for controller connection.

Set the Controller IP Address

Details how to assign IP addresses to the controller's Ethernet ports.

Update Controller Firmware

Provides methods for updating the controller's firmware revision.

Start to Use the Controller

Create a Logix Designer Application Project

Guides on creating a new Logix Designer project for the controller.

Go Online with the Controller

Explains how to establish an online connection with the controller.

Download a Project to the Controller

Describes the process of transferring a project from Logix Designer to the controller.

Use the Secure Digital Card

Store to the SD Card

Explains how to back up the Logix Designer project to an SD card.

Load from the SD Card

Covers loading a project from the SD card to the controller.

Connect to Different EtherNet/IP Network Levels

Connect to an Enterprise-level Network

Details connecting the controller to an enterprise network via specific ports.

Connect to a Device-level Network

Configure the EtherNet/IP Modes

Change the EtherNet/IP Mode

Develop Control Applications

Tasks

Monitor Controller Status

Produce and Consume (Interlock) Data

Commercial Operating System

Use the Reset Button with the COS

Use the Operating System Utilities Tool to Reinstall the COS

Guides on reinstalling the COS using the OS Utilities tool.

Troubleshoot the Controller

Controller Diagnostics with Logix Designer Application

Explains using Controller Properties to view fault conditions.

Controller Diagnostics with RSLinx Classic Software

Explains viewing diagnostic information using RSLinx Classic software.