Performance 9960 Self-Propelled Peanut Combine
122 06/03/05 MAN091
Header Speed Control
The header speed control is located in the
operator’s armrest control panel. Set the
header speed so that it picks up the windrow
completely as the combine travels through the
field. If the header is too slow, it will push the
vines along before picking them up, causing
peanuts to fall off the vines. If it is operated
too fast, the vines will pull apart before
entering the combine, and peanut loss will
occur. Dry vines typically require higher
pickup speeds than green.
To speed up the header, push the top of the
switch. To slow down the header, push the
bottom of the switch.
If windrows have excessive dirt,
increase the header speed slightly to help
shake out dirt before it enters the machine.
To Next Page
Loading...