9960 Self-Propelled Peanut Combine Storage
MAN091 06/03/05 237
Removing Combine from
Storage
1. Check the transmission, final drives, and
hydraulic/hydrostatic oil levels.
2. Inspect for leaks and add the correct oil if
needed.
3. Reconnect and/or change batteries.
4. Check oil and coolant levels. Inspect for
leaks and add oil and coolant if needed.
5. Adjust compressor drive belt tension.
6. Tension all belts.
7. Check airlift system for obstructions.
8. Check tire inflation.
9. Check Freon in sight glass. If there are
bubbles in the sight glass after the
compressor has run for 30 seconds or
more, see your John Deere dealer.
10. Review operator’s manual.
dipstick
hyd
dipstick
To Next Page
Loading...