9960 Self-Propelled Peanut Combine Operation
MAN091 06/03/05 103
Stopping the Engine
1. Lower the header to the ground.
2. Move the multi-function handle to neutral
and turn off the header and separator.
3. If the engine has been operating at working
load, idle at least one minute to cool
turbocharger before stopping the engine.
4. Turn the key and all other switches off;
remove key from ignition.
Cooling of the turbocharger
and some of the engine parts is provided
by engine oil. St
opping a hot engine might
cause damage to these parts.
It is important that you remove the key
from the ignition. This will help prevent
accidents and also keep the battery from
discharging.
position
To Next Page
Loading...