Amadas 9960 - Road Transport Disconnect Switch; Header Speed; 10% Speed Reduction

Operator’s Station 9960 Self-Propelled Peanut Combine
28 06/03/05 MAN091
Road Transport Disconnect Switch
When you transport the combine on the road,
the road transport disconnect switch must be
in the road position. Press the switch to road
position; the indicator light comes on and the
following functions are disabled:
• Header height resume
• Header height sensing
• Unloading conveyor
• Header raise/lower
• Separator engage
• Header engage.
To use these functions again, press the switch
so that the indicator light goes out.
Header Speed
The header speed switch controls how fast the
header auger and pick-up are rotating. To
speed up the header auger, push the top of
the switch. To slow down the header auger,
push the bottom of the switch.
10% Speed Reduction
The 10% speed reduction switch reduces
engine speed up to 10%
when it is in fast idle.
To reduce engine speed, turn the knob
counterclockwise.
Indicator
light
Switch
Slower
Faster