Amadas 9960 - Engine Speed; Four Wheel Drive; Four-Wheel Drive (Optional)

9960 Self-Propelled Peanut Combine Operator’s Station
MAN091 06/03/05 31
Engine Speed
The engine speed switches control the engine
RPM. Control engine speed as follows:
• For fast idle (2540 RPM), press switch A.
• For mid idle (1850 RPM), press switch B.
• For slow idle (1300 RPM), press switch C.
Note that an indicator signal lights up beside a
switch when it is pressed. If you press the
switch again, the light goes out and the engine
is taken out of that idle speed.
Four-Wheel Drive (Optional)
The four-wheel drive switches controls the
four-wheel drive system. The indicator light
comes on when either switch is pressed and
four-wheel drive is activated.
Refer to Chapter 5, Transportation, for specific
information on using the Four-Wheel Drive
option.
A
B
C
Switch
Indicator
IMPORTANT!
Whenever the combine is
being
moved, the engine should be in
either the mid or high speed. Failure to do
so can cause severe damage to the
hydrostat system.