9960 Self-Propelled Peanut Combine Maintenance
MAN091 06/03/05 229
Cleaning Combine
Keep your combine clean as follows:
Outside of Machine
• Wash outside using a power washer.
• Use soft absorbent cloths to wipe off
water droplets.
• Use a good, clear wax or glazing
compound that contains no abrasives
and a lint free towel to wax.
• Apply wax or compound by putting on
cloth and rubbing in with a circular
motion. After it is rubbed into the
surface well, turn the towel over and buff
with the dry side.
Plastic and Vinyl
• Use tar and road oil remover to remove
dirt, wax buildup, and other deposits on
the machine’s plastic trim parts.
• Remove dust and dirt with a whisk
broom or vacuum cleaner for interior
vinyl and plastic.
• Clean surfaces with a clean. damp cloth.
• For more thorough cleaning, wipe
surface with soft cloth and mild
detergent. Wipe off any excess.
• Clean vinyl surfaces with leather and
vinyl cleaner.
Fabric
• For water soluble stains, use a damp
cloth first, followed by a soft cloth with a
mild detergent and water.
• For grease, oil, tar, or other petroleum
based stains, apply fabric cleaner to
soiled surface according to the
manufacturer’s directions.
Do NOT clean plastic parts with
fuel or other petroleum based cleaners.
Always follow manufacturer’s
directions for all cleaners. Test each
cleaner on a small hidden area before
using on larger surface.
To Next Page
Loading...