Amadas 9960 - Lights

Electrical System 9960 Self-Propelled Peanut Combine
152 06/03/05 MAN091
Lights
Remember the following when you need to
replace a light bulb:
• If all of the lights fail in a particular
system at the same time, first check for
a tripped circuit breaker or relay.
• If a single light fails, the bulb may be
burned out.
• If the problem is other than with your
circuit breaker, relay, or bulb, see your
AMADAS/John Deere dealer.
CAUTION
Halogen bulbs contain gas unde
r
pressure. Handling a bulb improperly
could cause it to shatter into flying
fragments. Take the following precautions
when handling halogen bulbs:
• Turn off the
light switch and allow the
bulb
to cool before changing it. Leave
the switch off until the
bulb change is
complete.
•
Wear eye protection when changing a
halogen bulb.
•
Handle the bulb by its base. Avoid
touching the glass.
• Do NOT drop or scratch the bulb.
• Keep moisture away from the bulb.
• Place the used bulb in the new bulb’s
carton and disp
ose of properly. Keep
out of reach of children.