Electrical System 9960 Self-Propelled Peanut Combine
164 06/03/05 MAN091
Booster Batteries
1. Connect the first jumper cable (A) to the
positive (+) post of the booster battery and
to the positive (+) post of the combine
battery.
2. Connect the second jumper cable to the
negative (-) post of the booster battery and
then to a good ground on the combine,
away from combine batteries.
Gas driven o
ff by batteries is explosive.
Avoid sparks near batteries.
NEVER connect jumper cables with key
switch on.
NEVER jump start with more 12 volts.