Possible settings:
Enabled: When the vehicle is switched off, the GPS
receiver power supply comes from the vehicle
battery
.
Disabled: When the vehicle is switched off, the GPS
receiver power supply is interrupted.
NOTE
Recommended setting:
Deactivated
Setting the battery runtime
The battery runtime shows how long the GPS receiver
remains
active after the vehicle has been switched off.
NOTE
This function is only available for the following GPS
receivers:
AGI-4
1. In the setup menu, tap on "System" > "GPS" >
"Receiver".
2. Tap on "Battery runtime".
Loading OAF files
An OAF file allows the functions of the GPS receiver to
be activated. For more information,
see page 227.
REQUIREMENTS
One of the following GPS receivers has been
selected:
AGI-3
AGI-4
005393
001785
F | Configuring the AMAPAD | Entering the system settings
MG5574-EN-II | B.1 | 25.10.2016
54
To Next Page
Loading...
