Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove bolts -arrows-. Counterhold belt pulley with Wrench -
Pin Type - 3212- when doing so.
– Clamp the intake hose and the return line near the longitudinal
member with Hose Clamps - Up To 25mm - 3094- .
– Lay cloths beneath and remove banjo bolt -1-.
– Open spring clip -3- and disconnect intake hose -2-.
Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
6. Power Steering Pump, Hydraulic Pipes and Reservoir 345
To Next Page
Loading...
