Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1 - Bolt
❑ 50 Nm + 90°
❑ Always replace if re‐
moved.
2 - Suspension strut (air sus‐
pension)
❑ Removing and Instal‐
ling, refer to
⇒ “4.2 Air Suspension
Strut, Removing and In‐
stalling”, page 60 .
3 - Bracket
4 - Bolt
❑ 50 Nm + 90°
❑ Always replace if re‐
moved.
5 - Bolt
❑ 5 Nm
6 - Left Front Level Control
System Sensor - G78- / Right
Front Level Control Sensor -
G289-
❑ Removing and Instal‐
ling, refer to
⇒ “3.2 Left Front Level
Control System Sensor
G78 and Right Front
Level Control Sensor
G289 , Removing and
Installing”, page 216 .
7 - Bolt
8 - Coupling Rod
9 - Stabilizer Bar
10 - Self-Locking Nut
❑ 110 Nm
❑ Always replace if removed.
11 - Bolt
12 - Lower Control Arm
❑ Conical pin must be free of grease and oil.
❑ If necessary, clean using dry rag, do not use cleaning agents.
13 - Locking Plate
14 - Bolt
❑ M10: 50 Nm + 90°
❑ M12: 90 Nm + 90°
❑ Always replace if removed.
15 - drive axle
16 - Tie Rod
❑ Conical pin must be free of grease and oil.
❑ If necessary, clean using dry rag, do not use cleaning agents.
17 - Self-Locking Nut
❑ 90 Nm
Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
58 Rep. Gr.40 - Front Suspension