Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Bonded Rubber Bushing, Pressing Out (Suspension Strut Con‐
nection)
– Remove the wheel.
– Remove lower control arm, refer to
⇒ “5.2 Lower Control Arm, Removing and Installing”,
page 84 .
– Attach tools onto lower control arm, as shown in illustration.
1 - Threaded Spindle - T10230/1-
2 - Nut
3 - Thrust Piece - T10230/13-
4 - Lower Control Arm
5 - Tube - T10230/5-
6 - Thrust Plate - T10230/7-
7 - Hydraulic Press - VAS6178-
8 - Nut - T10230/2-
– Press out the bonded rubber mount.
Audi Q7 2007 ➤
Suspension, Wheels, Steering - Edition 01.2014
5. Lower Control Arm, Wheel Bearing Housing, Wheel Hub and Wheel Bearing 91
To Next Page
Loading...
