R5910032 /00 Freya300
The software update will start.
Update progress explanation
The update will proceed as follows:
1. The software package will be installed on the projector.
Image 17–5 Example of an update in progress
2. Once the software package has been installed, the following message will be prompted and the projector
will reboot.
Image 17–6 Example of the prompted reboot message
3. Take note: While rebooting, you will lose connection to the projector.
4. Once rebooted, every projector component will be updated to the version included in the software
package. Take into account that it might take a while until all components have been updated.
Image 17–7 Example of the components update page.
5. Once every component has been updated, you will be redirected to the Web Communicator login page.
In case of error
This supplemental menu item appears to indicate an error if an error was raised during the software update (e.
g. *Selected package for update is invalid).
Maintenance
To Next Page
Loading...
