Uni-Probe LB 490
BERTHOLD TECHNOLOGIES GmbH & Co. KG
2 – 207
Volume 2 3 Electrical Installation
2
Before closing, make sure that the thread turns are clean and
greased with OKS 217.
For information on the terminal assignment of the remaining termi-
nals, please refer to section "3.2 Terminals".
This Uni-Probe version includes an additional module for fieldbus
communication. This module is installed on the digital board of the
Uni-Probe (see Figure 3-11).
Figure 3-11 Digital board with field bus module
Terminals for
1: +
Fieldbus communication
2: -
Digital board Fieldbus module
To Next Page
