38477BA2B
5 – 476 25.5.09
4 Menu Overview Volume 5
4.2.26 SERVICE PLATEAU MEASURE PLATEAU
Starts the plateau measurement.
Select MEASURE PLATEAU to start the plateau measurement.
This function also allows you to edit the parameters for record-
ing the plateau.
Please refer to page page 5–513 for more information on perform-
ing a plateau measurement.
4.2.27 SERVICE PLATEAU SHOW PLATEAU
Shows the value pairs of the plateau points that have been
recorded in the course of the plateau measurement. This function
also allows you to edit the parameters for recording the plateau.
Draw a curve with these values to identify the plateau.
To Next Page
Loading...
