Chapter 4 Everest Software
Acquisition Mode
Acquisition mode measures and records data from samples following the order specified in the
Experiment Builder. This mode is typically used after optimizing settings in Setup mode. After sample
acquisition has been initiated in Acquisition mode, the ZE5 Cell Analyzer proceeds to each position
on the rack or plate, starts and stops sampling as specified in the run list, and records data files.
Acquisition mode requires minimal user intervention after acquisition has begun.
For more information, see Acquisition Mode Controls on page 282 and Running Samples in
Acquisition Mode on page 283.
92 | ZE5 Cell Analyzer and Everest Software
To Next Page
Loading...
