BRP Evinrude E-TEC G2 - Important Safety Messages

Reference Information
Model Designation
10
Model Designation
Engine Identification
Model and serial numbers are located on the swivel bracket and on the powerhead.
E 250 L HO AG B
HORSEPOWER SHAFT LENGTH:
L 20 in. Long
X 25 in. X-long
Z 30 in. XX-long
MODEL IDENTIFICATION
The first two characters identify
Model Version:
AA A First major variant
AB A Second major variant
AF A Third major variant
• follow the model identification shown
above.
• subsequent versions continue through the
alphabet as AG, AH etc.
• will not use letters from the word
INTRODUCES to identify models.
DESIGN FEATURES:
C Counter Rotation
D Evinrude E-TEC
G Graphite Paint
H High Output
O Hydraulic Steering
(non-power assist)
U 300 HP with Water Valve
PREFIX:
A Alternate Feature*
E Evinrude
The third character identifies
Model Revision:
AA A First revision
AA B Second revision
Subsequent revisions continue
through the alphabet in order
(A through Z).
* An “A” prefix in the model number of an Evinrude E-TEC G2 indicates a Counter-Rotation model with Dynamic
Power Steering (DPS).
1. Model and serial number 009146
1
1. Serial number 009147
1