BRP Evinrude E-TEC G2 - Gearcase Type; Housing Profile

358
Gearcase
Gearcase Type
Gearcase Type
Housing Profile
Outboard Model
Housing
Type
Description of Features Gear Ratio
Standard Rotation
20 in.
25 in.
30 in.
“SLX”
Front water inlets and straight leading edge, pressed
in propeller shaft bearing housing with retaining
spanner nut and locking ring, heavy duty standard
rotation gear set, pressed in forward bearing housing.
13:24 (.542)
Counter Rotation
25 in. / 30 in.
Front water inlets and straight leading edge, pressed
in propeller shaft bearing housing with retaining
spanner nut and locking ring, “CR” shafts, bearings
and heavy duty counter rotation gear set, pressed in
forward bearing housing.
13:24 (.542)
20.02 in.
(508.48 mm)
4.97 in.
(126.20 mm)
5008933-03