Stern and Swivel
DPS Manifold Service
320
Carefully separate the manifolds.
Remove the tube and o-rings from the bottom of
the DPS manifold. Then remove the filter.
Clean and dry all parts thoroughly.
Assembly
Install a new filter into the manifold. Apply a drop
of Power Trim/Tilt Fluid, P/N 767969, to the
o-rings of a new tube and o-ring assembly. Install
the tube and o-rings into the manifold.
Top of DPS Manifold
009455
1. Screw
009456
1. Tube and o-rings
2. Filter
009457
1. Filter
2. Tube and o-rings
009461
To Next Page
Loading...
