12
Reference Information
Service Specifications
Service Specifications
HP 200 225 250 250 H.O. 300
Engine
Full Throttle Operating Range
5400-6000
RPM
5400-6000
RPM
5400-6000
RPM
5400-6000
RPM
5400-6000
RPM
Power
200 HP
(147.1 kw)
@ 5500 RPM
225 HP
(165.5 kw)
@ 5500 RPM
250 HP
(183.9 kw)
@ 5500 RPM
250 HP
(183.9 kw)
@ 5750 RPM
300 HP
(220.6 kw)
@ 5750 RPM
Idle RPM in NEUTRAL 500 ± 50 RPM
Idle RPM in Gear 500 ± 50 RPM
Weight
(may vary depending on model)
20 in. (L) Models 537 lbs. (244 kg)
25 in. (X) Models 558 lbs. (253 kg)
30 in. (Z) Models 570 lbs. (259 kg)
Lubricant – Preferred Lubricant
–Acceptable Lubricant
Evinrude XD100, Evinrude XD50
Synthetic TC-W3 NMMA-certified oil
Capacity 2.0 gallons (7.5 liters)
Engine Type 74° V 6-Cylinder Loop-Charged
Displacement
210 cu. in. (3.4 L, 3441 cm
3
)
Bore 3.854 in. (97.89 mm)
Stroke 3.000 in. (76 mm)
Standard Bore
3.8535 to 3.8550 in. (97.87 to 97.90 mm)
To bore oversize, add piston oversize dimension to standard bore
Top Crankshaft Journal 1.6199 to 1.6204 in. (41.15 to 41.16 mm)
Center Crankshaft Journals 2.1870 to 2.1875 in. (55.55 to 55.56 mm)
Bottom Crankshaft Journal 1.5747 to 1.5752 in. (40.0 to 40.01 mm)
Rod Crankpin 1.4995 to 1.5000 in. (38.09 to 38.106 mm)
Piston Ring End Gap, Both 0.022 to 0.028 in. (0.57 to 0.72 mm)
To Next Page
Loading...
Need help?
General
