156
IFS 125M User Manual Bruker Optik GmbH
Web Interface 8
8.3.2.6 Detector diagnostics page
All available detectors are listed in the full report. For each detector, fault-diagnostics
relevant information is provided, e.g.:
• Which detector is currently selected?
• Is the detector cooled down to operating temperature? An operable detector is
indicated by a READY preamp board status.
Definition
A
Status message
B Currently installed detectors
Table 8.12: Components of detector diagnostics page
Figure 8.13: Detector diagnostics page
A
B
To Next Page
Loading...
