CDM-625A Advanced Satellite Modem MN-CDM625A
Front Panel Operation Revision 4
6–9
6.2.1.1 CONFIG: All
All = Stop
(Stop, Start)
Use this menu to configure the unit on a step-by-step basis. Every available configuration menu
displays in succession.
First, use the
▲▼ arrow keys to select Stop or Start. Press ENTER to execute.
Then:
• Use the
◄ ►arrow keys to select, and the ▲▼ arrow keys to edit, configuration parameters
as needed.
• Press ENTER to continue through all the configurations.
• Press CLEAR to discontinue.
Configuration Notes:
To Next Page
Loading...
