Comtech EF Data CDM-625A - RADIUS List of Supported Rfcs (Requests for Comment

T–1
Appendix T. CDM-625A RADIUS
CLIENT
T.1 Overview
Ethernet-based remote monitor and control (M&C) of the CDM-625A Advanced Satellite
Modem is available through the CDM-625A HTTP (Web Server) Interface, SNMP, and through
the issuance of remote commands and queries via Telnet.
For CDM-625A Advanced Satellite Modems that are equipped with the Optional IP Packet
Processor, additional remote M&C access is available via the Telnet Command Line Interface
(CLI).
RADIUS is the acronym for Remote Authentication Dial In User Service. This is a networking
protocol that provides centralized access authentication, authorization, and management for
CDM-625A Advanced Satellite Modems.
T.1.1 RADIUS List of Supported RFCs (Requests for Comment)
RFC No. Description
2865
“Remote Authentication Dial In User Service (RADIUS)”
Rigby, C., Willens, S., Rubens, A., Simpson, W., June 2000
1334
“PPP Authentication Protocols”
Llloyd, B., Simpson, W.,October 1992
1994
“PPP Challenge Handshake Authentication Protocol (CHAP)”
Simpson, W., August 1996
2759
“Microsoft PPP CHAP Extensions, Version 2”
Zorn, G., January 2000
2548
“Microsoft Vendor-specific RADIUS Attributes”
Zorn, G., March 1999