CDM-625A Advanced Satellite Modem MN-CDM625A
Ethernet-based Remote Product Management Revision 4
7–65
7.5.4.4.2 Status | Modem Logs
Chapter 6. FRONT PANEL OPERATION
Click the Base Modem tab, or – when you install and enable the optional IP Packet Processor
card – the Packet Processor tab to continue.
7.5.4.4.2.1 Status | Modem Logs | Base Modem
Use this page to control how the fault, statistics, and alarm masking parameters are processed
by the unit.
Figure 7-35. Status | Modem Logs | Base Modem page
Events Log
When events are present, information is viewable as per this example:
• Read Next Five Events – Click to buffer the next group of five stored events into the
scrollable events window.