Comtech EF Data CDM-625A - Command Line Interface; Home (Main) Menu

CDM-625A Advanced Satellite Modem MN-CDM625A
Telnet Command Line Interface (CLI) Operation Revision 4
9–10
9.3 Command Line Interface Pages
9.3.1 Home (Main) Menu
The Home Menu serves as the CLI’s primary navigation page. All selections made on this page
take you to the submenus listed in this table. Press a hot key to access a submenu from this top-
level navigation page.
Hot
Key
Description Function Sect.
A
Administration
Access administrative configuration submenu
9.3.2
B
Modem
Access modem configuration submenu
9.3.3
C
Network
Access network configuration submenu
9.3.4
D
WAN
Access WAN configuration submenu
9.3.5
E Outdoor Unit (ODU)
Access ODU comms, CSAT-5060 configuration submenus (summary
only)
9.3.6
F
Redundancy
Access 1:1 or 1:N redundancy configuration submenu
9.3.7
G General Information
Enter alphanumeric Circuit ID; view read-only CDM-625A operations
information screens
9.3.8
H Logs
Access Base Modem and Packet Processor stored events and
statistics logs, alarms control submenus
9.3.9
I
Statistics
Access CDM-625A operational statistics submenus
9.3.10
J
Contact View read-only Customer Support contact information screen
9.3.11
K
Remote Mode
Open the Remote Access Mode setting
9.3.1.1
See the listed chapter section for further information. Once you have confirmed that the Telnet
CLI’s Remote Access Mode is set to [Ethernet], press a hot key to access a configuration
submenu.