Comtech EF Data CDM-625A - Page 444

CDM-625A Advanced Satellite Modem MN-CDM625A
Telnet Command Line Interface (CLI) Operation Revision 4
9–64
9.3.7 Home > Redundancy Submenu
Open the Redundancy submenu from the Home menu. This submenu additionally displays the
status of the redundant modem setup. The redundant modem operation options are as follows:
Hot
Key
Dialog Window Option Entry
A Traffic IP Address Enter an IP address in the form XXX.XXX.XXX.XXX
B Traffic IP Network Prefix Enter a value from 8 to 30
C Redundancy 1-for-N Mode
Typical for either entry – Use the ↑↓ arrow keys to select
Disabled or Enabled
D
Packet Processor Redundancy
E
Force Redundant Switch
Use the ↑↓ arrow keys to select No Switch or Force Switch
Press a hot key to open a dialog window. Otherwise, press [ESC] to return to the Home
submenu.