CDM-625A Advanced Satellite Modem MN-CDM625A
Ethernet-based Remote Product Management Revision 4
7–52
7.5.4.3.7 Configuration | Utilities pages
Click the Utilities1 or CarrierID tab to continue.
7.5.4.3.7.1 Configuration | Utilities | Utilities1
Figure 7-26. Configuration | Utilities | Utilities1 page
Redundancy
If the unit is part of a 1:1 redundant pair of modems, and this unit is currently online, click
[Force 1:1 Switch] to cause the unit to switch to standby.
Re-Center Buffer
Click [Re-Center Buffer] to force the re-centering of the Plesiochronous/Doppler buffer.
Unit
Use the drop-down lists provided in this section to configure Test Mode, Stats Sample Interval,
Front Panel Lockout, RTS/CTS Control, and HSSI Handshake Control.
To Next Page
Loading...
