CDM-625A Advanced Satellite Modem MN-CDM625A
Ethernet-based Remote Product Management Revision 4
7–35
the “burstiness” of IGMP messages on the subnet; note that larger values make the traffic
less “bursty” as host responses are spread out over a large interval.
Enter a value, in seconds, from 1 to 25 (default = 10 seconds).
The number of seconds assigned to the Query Response Interval must be less
than the Query Interval.
Click [Submit] to save.
IGMP Joined Groups
This read-only table lists the IGMP Groups that are active on the modem. This allows you to
determine which services are being used and the minimum time before a service will be
terminated.
Click [Refresh] to update this section with its latest available statistics.
Multicast Routes
This read-only table lists the Multicast Routes that are active on the modem.
Click [Refresh] to update this section with its latest available statistics.
To Next Page
Loading...
