CDM-625A Advanced Satellite Modem MN-CDM625A
Serial-based Remote Product Management Revision 4
8–39
Parameter
(Instruction
Length of
Arguments
Description of Arguments
Response to
Command
(Instruction &
Response to Query
Handover
Differential
Path Delay
Sets or returns Differential Path Delay in the form sxx, where:
s=sign (+ or –)
xx=Value, from -13 to +13
EXAMPLE 1: AHD=+12 (Lead 12)
EXAMPLE 2: AHD=-03 (Lag 3)
AHD?
AHD*
AHD#
(see Description of
Arguments)
Handover Type
Sets or returns Antenna Handover Type in the form x, where:
0=Make Before Break
1=Break Before Make
AHT?
AHT#
(see Description of
Arguments)
Enable
Sets or returns the Time Protocol, where:
0=Disabled
1=Enabled
EXAMPLE: <0/TPE=1 (Time protocol enabled)
TPE?
(see Description of
Arguments)
Ethernet Time
Server
Sets or returns the Primary Ethernet Time Server IP Address for the Unit Tx Ethernet management port, in the form
aaa.bbb.ccc.ddd, where:
aaa=000-223
bbb=000-255
ccc=000-255
ddd=001-255
EXAMPLE: <0/TPS=192.168.001.005
TPS?
(see Description of
Arguments)
Ethernet Time
Server
Sets or returns the Backup Ethernet Time Server IP Address for the Unit Tx Ethernet management port, in the form
aaa.bbb.ccc.ddd, where:
aaa=000-223
bbb=000-255
ccc=000-255
ddd=001-255
EXAMPLE: <0/TPB=192.168.001.005
TPB?
(see Description of
Arguments)
Latitude
Sets or returns the Carrier ID Latitude, in the form ddaaamm.mmbbbD, where:
dd=degrees Latitude,
aaa=fixed value “deg”.
mm.mm=decimal minutes of the Latitude.
Bbb=fixed value “min”.
D=direction (N (North) or S (South)).
EXAMPLE: <0/LAT=33deg59.99minN (Latitude is 33º59.99΄N)
LAT?
bD
{see Description of
Arguments
To Next Page
Loading...
