CDM-625A Advanced Satellite Modem MN-CDM625A
Telnet Command Line Interface (CLI) Operation Revision 4
9–3
Next, log in to the Telnet CLI using a valid Username and Password:
The Telnet CLI Home menu should now be accessible:
1) In order to use the Telnet CLI to make configuration changes to the CDM-625A,
Remote Access Mode should always be set to [Ethernet].
2) PuTTY in Linux may require the following setting to render correctly:
Settings > Window > Translation > Override with UTF-8 if locale says so [UNCHECK]
To Next Page
Loading...
