Comtech EF Data CDM-625A - Page 434

CDM-625A Advanced Satellite Modem MN-CDM625A
Telnet Command Line Interface (CLI) Operation Revision 4
9–54
9.3.4.11 Home > Network > SNTP (Simple Network Time Protocol)
Open the Simple Network Time Protocol (SNTP) page from the Network submenu. This page
contains the following options:
Hot
Key
Dialog Window Option Entry
A
SNTP Enable
Use the ↑↓ arrow keys to select Disabled or Enabled
B
SNTP Primary Server
Typical for either entry – Enter an IP Address in the form
XXX.XXX.XXX.XXX
C
SNTP Backup Server
[R/O]
SNTP Primary Last Update
These read-only entries display the date/timestamp of the last
updates – otherwise, if no updates have occurred, entries will
read “Never”
[R/O] SNTP Backup Last Update
D
RTC Time
Enter a time in the form HH:MM:SS
E
RTC Date
Enter a date in the form DD:MM:YY
Press a hot key to open a dialog window. Otherwise, press [ESC] to return to the Network
submenu.