CDM-625A Advanced Satellite Modem MN-CDM625A
CDM-625A ODU (Transceiver, BUC, LNB) Operation Revision 4
10–46
LNA
• LNA Power Enable – From the drop-down list, select On or Off.
• LNA Fault Logic – From the drop-down list, select Summary or No Summary.
Unit
• AGC (Automatic Gain Control) – From the drop-down list, select On or Off.
• Reference Oscillator Adjust – Enter a value from 0-255.
• Circuit ID – Enter a Circuit Identification name of up to 24 alphanumeric characters.
• Lock Mode – From the drop-down list, select On or Off.
Click [Submit] to save.
To Next Page
